Skip to content
Dark Gray Ellis Mitre Band Saw 2000

Ellis Mitre Band Saw 2000

by Ellis Mfg. Co., Inc.
Save 1% Save 1%
$5,949.99
$5,949.99 - $5,949.99
$5,949.99
$5,895.00
$5,895.00 - $5,895.00
$5,895.00
  • Miters 60 degrees left and right
  • 1-1/2 hp motor
  • Hydraulic head down feed
  • Cuts 11 inch round at 90 and 45 degrees
  • Dry cutting saw
  • Miters 60 degrees left and right
  • 1-1/2 hp motor
  • Hydraulic head down feed
  • Cuts 11 inch round at 90 and 45 degrees
  • Dry cutting saw

Features

The ELLIS 2000 band saw is very popular for its dual mitering capability, extremely large cutting capacity, and rugged durability. The material stays stationary for mitre cuts, while the head rotates up to 60 degrees both left and right. Fast and accurate angle selection are possible with the built-in protractor. Head feed rate is controlled by the hydraulic control, that has a locking valve for setting up cuts. Material clamping and unclamping is quick and easy with the standard quick acting vise. This stationary band saw will meet your needs in the shop or on the work site.

  • Head of band saw moves left or right for angle cutting
  • Built-in Protractor for fast and accurate selection of angles
  • Stock remains in one position for all cuts
  • Mitres 60° both ways

Specifications

Capacity
(90° & 45°)		 11” Round at 90°
10” Pipe at 90°
17” Flat at 90°
11” H x 13” W at 90°
11” Round at 45°
10” Pipe at 45°
11” Flat at 45°
9” H x 11” W at 45°
Capacity (60°) “6” W x 9” H  at 60°
6” Square at 60°
7” wide x 2” thick – Flat Stock at 60°
6” pipe (6-7/8” O.D.) at 60°
Blade Speeds (3) 60-115-230 FPM
Blade Size 12’0” x 1”
Feed Control Hydraulic Adjusting
Vise Quick Adjusting Camlock
Shut Off Automatic
Motor – Standard 1-1/2 H.P. 220 Volt Single Phase
Optional 3 PH 220-440-460-480-575
Shipping Weight 800 lbs.
Size Table Height 28-1/8”
Length 72”
Width 38-1/4”
Height 47”
Sealed Oil Bath Worm Gear Standard
Removable Chip Tray Standard
Construction Heavy Steel; Welded & Machined for Accuracy & Durability

Accessories

Accessories – 2000 Part #
Air System 5922 (120V)
5932 (230V)
Stock Gauge with Micro-Adjuster 5750
Single Stock Stand – 1 Roller 6185
Stock Stand – 5’ Long, 4-Rollers
(20″ W)		 6228
Pipe Clamp Attachment
for Camlock Vise		 6106
Screw Type Vise 6622
Pipe Clamp Attachment
for Screw Vise		 6286


Manuals

Quick Saw Guide + Safety Guidelines
Operating Instructions & Parts Catalog

The ELLIS 2000 band saw is very popular for its dual mitering capability, extremely large cutting capacity, and rugged durability. The material stays stationary for mitre cuts, while the head rotates up to 60 degrees both left and right. Fast and accurate angle selection are possible with the built-in protractor. Head feed rate is controlled by the hydraulic control, that has a locking valve for setting up cuts. Material clamping and unclamping is quick and easy with the standard quick acting vise. This stationary band saw will meet your needs in the shop or on the work site.

  • Head of band saw moves left or right for angle cutting
  • Built-in Protractor for fast and accurate selection of angles
  • Stock remains in one position for all cuts
  • Mitres 60° both ways
Capacity
(90° & 45°)		 11” Round at 90°
10” Pipe at 90°
17” Flat at 90°
11” H x 13” W at 90°
11” Round at 45°
10” Pipe at 45°
11” Flat at 45°
9” H x 11” W at 45°
Capacity (60°) “6” W x 9” H  at 60°
6” Square at 60°
7” wide x 2” thick – Flat Stock at 60°
6” pipe (6-7/8” O.D.) at 60°
Blade Speeds (3) 60-115-230 FPM
Blade Size 12’0” x 1”
Feed Control Hydraulic Adjusting
Vise Quick Adjusting Camlock
Shut Off Automatic
Motor – Standard 1-1/2 H.P. 220 Volt Single Phase
Optional 3 PH 220-440-460-480-575
Shipping Weight 800 lbs.
Size Table Height 28-1/8”
Length 72”
Width 38-1/4”
Height 47”
Sealed Oil Bath Worm Gear Standard
Removable Chip Tray Standard
Construction Heavy Steel; Welded & Machined for Accuracy & Durability

Accessories – 2000 Part #
Air System 5922 (120V)
5932 (230V)
Stock Gauge with Micro-Adjuster 5750
Single Stock Stand – 1 Roller 6185
Stock Stand – 5’ Long, 4-Rollers
(20″ W)		 6228
Pipe Clamp Attachment
for Camlock Vise		 6106
Screw Type Vise 6622
Pipe Clamp Attachment
for Screw Vise		 6286
Quick Saw Guide + Safety Guidelines
Operating Instructions & Parts Catalog

1-year warranty & USA Local Support

1 year on the whole sfx laser machine, 2 years on laser source (consumables not included). After-sales centers in NY & CA, Remote assistance, lifetime online support. 

Our pre-sales technical team offers expert advice to help you choose the right machine, while our after-sales team, certified with five-star service, provides remote support and lifetime online assistance. We also have after-sales centers in NY and CA for local support.

Free Shipping & 30-day Return Policy

Free delivery with no import duties for America customers via DHL/UPS/FedEx. Please see our shipping policy for delivery time estimates. All purchases are covered by the SFX 30 day return policy (Return & Exchange Policy).

Efficient customer service. If you have a question or query, we aim to provide you with immediate support and technical guidance. 

Manufacturer warranty. All our products are new and ship directly from the manufacturer with a factory warranty. 

Price match guarantee. If you find a better deal online, we'll match it. 

Technical support. We provide all the technical resources needed to get you up and running with our products in no time. 

Financing options. Choose between four biweekly payments with 0% APR or monthly installments with no hidden fees.*

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare